$120.00
In stock
System Explained
2 uprights, 2 horizontal beam levels. Top level is the work surface, bottom level provides under-bench storage.
1 Upright FrameHeavy-gauge steel post with pre-punched slots every 80mm. Sets the overall height and allows tool-free tier level height adjustment. | 2 Horizontal BeamCold-rolled steel beams hook into upright slots for boltless assembly. Safety pins lock beams in place, carrying the full load across the bench length. |
3 Foot PlateSpreads load across the floor. Pre-drilled for optional floor anchoring. | S Tier Level HeightBoth beam levels are independently adjustable in 80mm increments with no tools needed. Set the top level to your working height and the bottom level to suit what you're storing underneath. |
L Bench LengthExternal length of the assembled workbench. See specs tab for exact dimension. |
1 Upright FrameHeavy-gauge steel post with pre-punched slots every 80mm. Sets the overall height and allows tool-free tier level height adjustment. |
2 Horizontal BeamCold-rolled steel beams hook into upright slots for boltless assembly. Safety pins lock beams in place, carrying the full load across the bench length. |
3 Foot PlateSpreads load across the floor. Pre-drilled for optional floor anchoring. |
S Tier Level HeightBoth beam levels are independently adjustable in 80mm increments with no tools needed. Set the top level to your working height and the bottom level to suit what you're storing underneath. |
L Bench LengthExternal length of the assembled workbench. See specs tab for exact dimension. |
What You're Getting
The 900mm x 2000mm x 600mm (0.9m x 2m x 0.6m) is a heavy-duty steel workbench designed for garages, sheds, workshops and warehouses. Each level is rated to carry 250kg giving you a combined capacity of 500kg across the full unit, with the adjustable under-bench level keeping tools and equipment within reach without cluttering your work surface.
Built with the same bolt-together frame and hook-in beam system as our longspan shelving, this bench is quick to assemble, adjustable in height, and built to take a beating in industrial environments.
Why It Works
Fully adjustable levels. Both beam levels hook into the upright slots every 80mm and can be repositioned independently without any tools. Just set the top to your working height and the bottom to suit what you're storing underneath.
Under-bench storage included. The lower level provides a dedicated tier for tools, bins or equipment, remaining within reach without cluttering the work surface.
Genuine load rating. Rated to 250kg uniformly distributed across the work surface and under-bench level. Check the specifications table above.
Powder-coated finish. Resists rust, oil, chipping and cleaning products. Built for workshop and industrial environments.
One-person assembly. Goes together in under 15 minutes. Step-by-step instructions included, with no specialist skills needed.
Before You Buy
Workbench ships as flat-pack components: 2 upright frames, 4 horizontal beams, 4 layer boards, and all necessary hardware. Everything needed to assemble the unit is included.
Assembly can be done by one person and requires approximately 15 minutes. The frame bolts together; beams hook in tool-free; layer boards drop onto the beams. No welding, no drilling into the unit, no specialist skills required.
Important: Refer to dimension L in the diagram above for the exact length of this unit. Measure your space before ordering.
Anchoring: Foot plates are pre-drilled for optional floor anchors which are recommended in commercial settings.
Common Questions
